Using either an air compressor with an air gun attachment or a toothpick, try to remove dirt and grime from the gears and other moving parts. If the inner workings are somewhat dirty, this could be the cause of the problems.Check that the lock is not in place or otherwise blocking the sled drive from extracting the CD. Many CD players have a lock attached to the door that is used to protect the device during shipping.If the door is noisy, you can also put a drop of electric motor oil inside the electric motors to quiet them. Examine all gears and observe the electric motors for any burn marks or damage.Replacing the belt is an easy and cheap fix. If there's a belt, check that it is still attached and tight. Examine the drawer mechanism for loose or broken parts. Make sure to use jeweler's screwdrivers and carefully store the screws that you remove (they are tiny!). Open the bottom of the player and remove the optical deck.If the door of your CD player sticks or otherwise doesn't work properly, try the following troubleshooting ideas: If it tends to stick while moving up or down, or it doesn't remain flat with the deck while being moved around - this is a sign of a mechanical failure and that the entire unit may need to be replaced. After cleaning, next check the movement of the lens itself.If you can get the end of a Q-tip under the lens and you can lift it up slightly, insert another alcohol-moistened swab underneath and clean off the turning mirror (looks like glass) under the lens.Most problems are caused by a dirty lens though, so a simple cleaning may do the trick. If you see any major scratches, that means that the lens assembly may require replacement, and you'd be better off buying an entirely new CD player. Examine the lens after you've cleaned it.If you can open the CD door and see the lens by shining a flashlight inside, you can clean it by inserting a long Q-tip moistened with pure isopropyl alcohol. You will need to remove the unit from the dash, open it up, and locate the lens. Contamination of the lens with dust or dirt can significantly reduce the quality of the data read off of audio discs. If you are experiencing skipping audio, or music that simply stops playing entirely, try the following maintenance tips: If you've explored all of the possibilities listed above and you're still having difficulty, you may need to explore how to fix a car CD player using a more advanced approach. If it doesn't, the the problem is the disc and you'll need to look into cleaning or repairing the disc so that it can play normally again. ![]() ![]() Before assuming that the problem is with the player, test a few newer CDs and see if the skipping behavior continues. Is the music skipping or stopping completely? This is commonly caused by dirty or damaged tracks on the disc.This will cause the player to act as though it isn't working. When you insert a disc, is the CD display blank? While it sounds simple, one of the most common mistakes people make is inserting a CD upside down.Make sure all channel (speaker) connections are solid and make good contact. You'll need to open the dash to access the unit (see your owner's manual or an auto repair manual for your car). If the speakers look fine, another issue that could affect sound is the quality of the connections behind the head unit of your system.Also check the electrical connections on the back to make sure they are still firm and make a good connection. Take the time to remove the covers from the speakers in your car and make sure there's no trapped dirt or damage. Is the problem related to the volume or quality of the sound? This could be related to the speakers and not the main unit of your audio system.Before you decide to open up the player and attempt more invasive repairs, try some of these more basic troubleshooting tips to figure out how to fix a car CD player:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |